|
Star model - Home
Page
Technical features
- Details
2 YEARS
WARRANTY |
|
|
|
|
|
 |
 |
|
34/14.01/7623
TS EN
625 - TS EN 483 |
0694 |
| 
|
|
|
BAY ROOM
THERMOSTAT
(OPTIONAL) |
|
|
• Stabilizes the room
temperature
•
Ensures energy saving till
20%
|
| |
| |
|
Features
- Sensor to prevent overheating
: This is the safety system that
provides stopping the burning operation of the Hung-wall
boiler, in case the temperature of the circuit water is more
than 100°C (and the other system sensors cannot fulfill
their duty). In this way, this system provides damaging the
hung wall boiler.
- Control of the Fire with Ion
Electrode: In case the burner is going out, the ion
electrode, that is permanently in contact with flame upon
the burner, is sending this situation to the electronic card
and is turning off the gas. In this way, is prevented the
gas consumption and gas leakage.
- The Automatic By-Pass
System: Our Wall-Hung Boilers are provided with a
by-pass pipe wich is allowing the water to pass only into
one way between all way crane and return group. In this way,
even if all the cranes of the wall-hung boiler are closed,
it provides the water circulation of 350 lt/h and prevents
damaging of the boiler.
- Anti-Pump Seizing System preventing
the pump working without water: This is the safety
system stopping the boiler working and preventing Due to the
pressure sensor that is situated on the circulation pump of
the wall-hung boiler, in case the water pressure on the
circuit is under 0,6 bar.
- Anti-Frost System against Freezing
: During cold weather, in case the water from the
inner circuit of the boiler decreases under 5°C the burner
starts burning and is heating the water till 36°C. In this
way the system prevents cracking of the circulation pump,
heat exchanger and other pieces of the boiler due to the
freezing events.
- Anti-Block System Preventing the
Jamming of the Pump : This is the system providing
the functioning of the pump for 20 seconds, once every 21
hours, in order to prevent the jamming of the pump, in case
the boiler is not used for a long period.
- A Special Filter on the Entrance of
the Cold Water : Due to the filter positioned after
the ball valve allowing the boiler to receive water, it
provides the possibility to clean the water from foreign
substances.
- Safety Valve : In case the
pressure of the water is exceeding over 3 bar, this valve is
providing the evacuation of the water surplus from the
system by using this valve in order to prevent the damage of
the boiler.
-
The Gradual
Circulation Pump : This is a system providing the
adjustment of According to the client/user
demand.
- Elektronic Full Modulation
: Due to a special programme electronical card
situaated on the boiler, all the operations regarding the
values are provided by an delectronic card.
- Electronic Ignition: Using
only one button it provides electronic ignition and the
functioning of the boiler.
- The Values of hot water indicated
by led index : Situated on the front panell of the
boiler this is the system informing the user about the water
temperature.
- A Sensible Setting of the Water of
Central System and of Heating : Due to the sensors,
different for hot water and heating system of the boiler a
temperature setting of ±1°C can be done providing also
savings of gas and a better confort.
- Isolation Protection : Our
wall hang boiler are produced from inox sheet iron using the
best tehnology of moulding. The burning room is very well
isolated, having also an extra second isolation. Due to this
second isolation it achieves a 5 % savings and isolation
against noise, providing a better functioning and more
confort. This isolation system is realised from one piece
only, being a high quality system in Europe.
|
|
