|
|
|
|
Smaller size, lower weight
(330x400x700, 40 Kg)
Our wall
hung boilers can easily be asembled in smaller
spaces thanks to their smaller size.
Microprocessor controlled
card
The wall mounted boilers can
perform all functional operations by means of
microprocessor card. The necessary software
which enables your wall mounted boiler perform
safely and with highest efficiency has been
installed.
Anti freezing protection
system
The wall mounted boiler can
automatically activate the pump when the water
temperature inside the wall mounted boiler goes
below (+8 °C) and if the water temperature
inside wall mounted boiler goes below (+5
°C) the boiler thanks to its sensor positioned
on "nayla" wall mounted boiler card.
Accurate temperature adjustment on
central heating and heating circuits ± 1
°C
Acuurate temperature adjustment
can be performed thanks to the sensors and
microprocessor used.
Timer room thermostat connection
bracket
The room thermostat
can be connected with the wall hung boiler so
remote control of the temperature is possible.
Pump feature that those not allow
the pump run the wall mounted boiler without
water
In order for
the circulation pump used in wall mounted
boilers not be damaged when there is no water,
low pressure water switch has been used. When
the water pressure goes below 0.6 bars, the
system will automatically be blocked.
Ignition control bymeans of
ionization electrode
Constant flame
inspection is performed by detecting the
flame combusting thanks to the ionization
electrode assembled into the combustion chamber.
Automatic by-pass system
When the vanes in the system are closed, it
regulates the flow of water inside due to the
risk of pump getting jammed and be damaged.
Overheat sensor
The
mounted boiler prevents the water from
overheating and hurt and damage the user and
wall mounted boiler by maintaining secondary
safety precaution when even when the heat sensor
on the wall mounted boiler is out of service due
to a breakdown.
Electronic ignition
Nayla mounted boiler has electronic ignition
mechanism. An automatic, safe ignition is
provided by means of it.
Pump anti-blockage system
It prevents the pump from being blocked when
the wall mounted boiler is not used for more
than 24 hours by automatically running the pump.
Easily adjustable circulation
pump
The pump adjustment switch is
positioned at the bottom of the wall mounted
boiler thus the user may select the suitable
adjustment level and obtain energy savings.
Low Nox level
As the
gases reach the wall mounted boiler, they
combust and exhaust some gas out to the
atmosphere at certain amounts. The gases which
arise due to combustion should be at a level
which does not pollute atmosphere. Our wall
mounted boiler is manufactured at European
standards defined as Nox group 3 and they
maintain a minimum level of pollution in
atmosphere.
Electronic full
modulation
This feature provides the
suitable amount of gas or flame length according
to the suitable heat. Hence the consumption of
gas is kept at a minimum level.
Ergonomic and separate controlling
board
The function and adjustment
buttons have been designed in a way that will
allow all the users easily apprehend. The
illuminated gauges and lights on the controlling
board enables you to see the temperature or
possible breakdowns.
Operability with natural gas and
LPG
By assembling the necessary
parts on the induction manifold on the wall
mounted boiler, the operability with natural gas
or LPG is enabled. There are sperate combustion
functions of both gases on the control card
used.
Lower gas consumption, higher
efficiency
We can increase the
standard efficiency assumed as 90% to 93%. Thus
we can obtain the same values of heat with lower
consumption of gas.
| |
| Nayla Ön Panel |
 |
|
 |
| Room Thermostat
(OPTIONAL) |
• Stabilizes the room
temperature
• Ensures energy saving till
20%
|
|
